Vanguard VEO CSMM2 Expandable Double Cold Shoe Mount

Expanding cold shoe multi-mount to attach up to two accessories such as a microphone and LED light to your camera

The VEO CSMM2 allows you to mount two accessories with a cold shoe mount base to your camera hot shoe mount, and adjust the width up to 21mm wide.

To attach to your camera, simply slot into the hot shoe mount and tighten the lower disc, tightening with the allen key provided for the most solid grip possible.

To attach it to your accessory, simply slot the accessory into the chosen cold shoe mount and tighten the locking knob on the VEO CSMM2.

You can then adjust the width of the cold shoe mount bar in or out by up to 13.5cm for optimal position or balance. Simply lift the flip lock to release the plate, adjust to your chosen position, and flip the lock back down to secure it. At the end of each bar is a small protruding button that stops the cold show mounts falling off the end.

On the front of each cold shoe mount is a 1/4″ thread, allowing you to attach any suitable support arm, such as a Vanguard tripod support arm, to add further accessories.

On the base there is also a 1/4″ thread, allowing it to be attached to any suitable support arm instead of your camera hot shoe mount

At 120mm x 55mm, this lightweight and versatile double cold shoe multi-mount is more than just a solution for attaching accessories.

So why not choose your accessories and unleash your creativity?

width (in cm)

4 cm

height (in cm)

5 cm

length (in cm)

12 cm

condition

new