Edelrid CLIMBING ROPE 9.8mm – PARROT 70 METRES

Our team of climbers selected this 9.8 mm rope for climbers looking for strong rope with a low environmental footprint.Innovative assembly technology allows the use of high-quality leftover yarns from Edelrid production. Its strength is identical to that of other Edelrid ropes.

TECHNICAL FEATURES

NUMBER OF FALLS: 7
IMPACT FORCE: 8.8 KN
DYNAMIC ELONGATION: 32%
STATIC ELONGATION: 9.3%

WEIGHT

62 g/m

PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.

ROPE COLOUR

The pattern and colour of the rope may vary due to the use of leftover ropes

WASHING YOUR ROPE

It’s important to properly care for your rope to reduce wear.
As dirt wears ropes down, we recommend:
1- using a rope cover;
2- If the rope is dirty, wash it with clean, lukewarm water.
Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseilles/household soap) and then rinse thoroughly with clean water.
3- Air dry the rope out of the sun and away from all sources of heat.

STORING YOUR ROPE

Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.

CHECKING YOUR ROPE

It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!

CERTIFICATION

Rope certified according to standard EN 892:2016 Single